Siemens CL-110-I - Manual (Page 15)

Chapter 3: Configuration
Note: If the USB device is not detected, check the USB cable
between the PC and the device. Also verify that the device is
power on.
s
The system will detect the USB driver automatically. Now, the system will copy the proper
files for this device.
t
When the file copying finished, the dialog above will close. The InstallShield Wizard
Complete appears, click Finish. Now the USB driver is installed properly. You can use the
device.
For Windows XP
n
Run the USB installation program from the CD provided by your device package.
o
An InstallShield Wizard will appear. Please wait for a moment.