Siemens CL-110-I - Manual (Page 43)

Chapter 3: Configuration
9. Wait for Windows copying files.
10. When prompted with the System
Settings Change dialog box, click Yes
to restart your computer.
For Windows NT
1. Click Start, point to Settings, and then
click Control Panel.
2. Double-click the Network icon.
3. The Network window appears. On the
Protocols tab, check out the list of
installed network components.
Option 1: If you have no TCP/IP
Protocol, click Add.
Option 2: If you have TCP/IP Protocol
installed, go to Step 7.
4. Highlight TCP/IP Protocol and click
OK.