Siemens CL-110-I - Manual (Page 51)

Chapter 3: Configuration
14. Under the General tab,
enable Use the following IP
address. Enter the IP
address: 192.168.1.x (x is
between 2 and 254), Subnet
Mask: 255.255.255.0 and
Default gateway:
192.168.1.1. Then click
Ok.exit.
Configure PC to get IP address from DHCP
If your ADSL Router operates as a DHCP server for the client PCs on the LAN, you should
configure the client PCs to obtain a dynamic IP address. Please follow the previous section to install
TCP/IP component. Only that you do not need to specify an IP address when configuring TCP/IP
properties.
The following section describe the procedures for CPEs to get IP address:
For Windows 98
On the IP Address tab, select Obtain an IP
address automatically. Then click OK.
For Windows ME