Step 3: tv hookups, Ge tti ng s ta rte d – Sony DVP-NS300 User Manual
Page 15
15
Ge
tti
ng S
ta
rte
d
Step 3: TV Hookups
Connect the supplied audio/video cord and power cord (mains lead) in the order (1~3) shown
below. Be sure to connect the power cord (mains lead) last.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
If you want to change the aspect ratio, please refer to page 58.
To change the color system
The color system of the player is set to NTSC or PAL. If the on-screen display of the player does
not appear on the TV, change the color system of the player to the same color system (PAL or
NTSC) of your TV. To change the color system, hold POWER down while pressing X on the
player. The power indicator lights up in green and changes to red. Then release X.
z
This player switches the color system, PAL or NTSC, according to the connected TV. To check the color system
of the player, press POWER on the player and then press [/1 on the remote. The power indicator lights up in green.
When “NTSC” appears on the front panel display, the color system of the player is set to NTSC. When “NTSC” does
not appear, the color system is set to PAL.
PCM/DTS/MPEG/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO 1-L
VIDEO 1
Y
C
B
C
R
R-AUDIO 2-L
VIDEO 2
DIGITAL OUT
LINE OUT
VIDEO 1
R-AUDIO 2-L
VIDEO 2
LINE OUT
R-AUDIO 1-L
VIDEO
AUDIO
INPUT
L
R
(yellow)
(white)
(red)
3
Power source
CD/DVD Player
TV
2
Power source
l
: Signal flow
to VIDEO INPUT
1
Audio/video
cord (supplied)
to LINE OUT
(VIDEO) 1
to AUDIO INPUT
to LINE OUT
L/R (AUDIO) 1