Sony DVP-NS300 - Manual (Page 27)

Hook
ups
27
qa Press ENTER.
DTS is selected.
qs Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 21 to 23 (
through ).
qd Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page
62).
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under SETUP in the Control Menu (page 56).
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in page 21 to 23 (
through ). Each of these are the default settings and do not need to be adjusted when you
first connect the player. Refer to page 56 for using the Setup Display.
Audio Cord Connection Type You select Page
D-PCM 62
DOLBY DIGITAL (only if the
amplifier/receiver has a Dolby Digital
decoder) 62
Audio Cord Connection Type You select Page
OFF 63
ON (only if the amplifier/receiver
has a DTS decoder) 63
Enjoying the surround sound effects
B-2 C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
ON
DOWNMIX: DOLBY SURROUND
D-PCM
PCM
DTS: OFF
OFF
ON
B
D
B-2 C-2
A D
B
D
continued