Sony DVP-NS300 - Manual (Page 21)

Hook
ups
21
This connection will use your two front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the
amplifier (receiver) has a digital input jack, use . When connecting to an MD deck or a DAT
deck, use . In this case, you can also connect the player directly to the MD deck or DAT
deck without using your stereo amplifier (receiver).
xRecommended surround sound effects for the connection only
•
TVS STANDARD (page 45)
z In connection , you can use the supplied audio/video cord instead of using a separate audio cord.
z To realize better surround sound effects, make sure that your listening position is in between your speakers.
Note
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the connection.
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
B
B-1
B-2
B-2
B-1
B-1
B-2
PCM/DTS/MPEG/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO 1-L VIDEO 1
Y
C B
C R
R-AUDIO 2-L VIDEO 2
DIGITAL OUT LINE OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
B-2 B-1
VIDEO 1
R-AUDIO 2-L VIDEO 2
LINE OUT
R-AUDIO 1-L
l : Signal flow
CD/DVD player
Stereo amplifier (receiver)
MD deck/DAT deck
Front
(L)
Front
(R)
[Speakers]
(white)
(red)
(white) (red)
Coaxial digital cord
(not supplied)
Stereo audio cord
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to audio input to coaxical or optical
digital input
or or
continued