Sony DVP-NS300 - Manual (Page 69)

Additiona
l Infor
m
a
tio
n
69
Specifications
System
Laser Semiconductor laser
Signal format system NTSC/PAL (See page 59 to switch)
Audio characteristics
Frequency response DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio) 115 dB (LINE OUT L/R (AUDIO) jacks 1, 2 only)
Harmonic distortion 0.003 %
Dynamic range DVD: 103 dB
CD: 99 dB
Wow and flutter Less than detected value (±0.001 % W PEAK)
The signals from LINE OUT L/R (AUDIO) 1/2 jacks are measured. When you play PCM sound tracks with a 96 kHz
sampling frequency, the output signals from the DIGITAL OUT (COAXIAL and OPTICAL) jacks are converted to
48 kHz sampling frequency.
Outputs
General
Power requirements 220 to 240 V AC, 50/60 Hz
220 V AC, 50/60 Hz
220 V AC, 60 Hz
110 V AC, 60 Hz
See page 2 for further information.
Power consumption 12 W
See page 2 for further information.
Dimensions (approx.) 430
Ч
74
Ч
256 mm (width/height/depth) incl. projecting parts
Mass (approx.) 2.7 kg
Operating temperature 5
°
C to 35
°
C
Operating humidity 25 % to 80 %
Supplied accessories
See page 14.
Specifications and design are subject to change without notice.
Jack name Jack type Maximum output level Load impedance
DIGITAL OUT (COAXIAL) Phono jack 0.5 Vp-p 75 ohms terminated
DIGITAL OUT (OPTICAL) Optical output jack -18 dBm Wave length: 660 nm
LINE OUT (AUDIO) (1, 2) Phono jack 2 Vrms (50 kilohms) Over 10 kilohms
LINE OUT (VIDEO) (1, 2) Phono jack 1.0 Vp-p 75 ohms, sync negative
S VIDEO OUT 4-pin mini DIN Luminance signal: 1.0 Vp-p
Colour signal: 0.3 Vp-p (PAL)
0.286 Vp-p
(NTSC)
75 ohms, sync negative
75 ohms terminated
COMPONENT
VIDEO OUT (Y,C
B
,C
R
)
Phono jacks Y: 1.0 Vp-p
C
B
, C
R
: 0.7 Vp-p
75 ohms, sync negative
75 ohms terminated