Sony MZ-R501 - Manual (Page 25)

25
3
Press MENU/ENTER.
The display changes as follows.
Note
Items may appear differently depending on the
recorder’s operating status or the recorder
settings.
z
If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 21.
Locking the controls
(HOLD)
To prevent the buttons from being
accidentally operated when you carry the
recorder, use this function.
1
Slide HOLD in the direction of the
SELECT
..
To unlock the controls
Slide HOLD in the opposite direction of
the arrow.
Connecting to a stereo
system
Connect the i jack of the recorder to the
LINE IN jacks of an amplifier or a
recorder with a line cable (not supplied).
The output is analog. The recorder plays
the MD digitally and sends analog signals
to the externally connected equipment.
1
Press N to start playing.
Notes
• Even when connecting to the externally
connected equipment, the Mega Bass function
is operative. If you do not want the effect of
the Mega Bass function on your recording or
the output from the externally connected
equipment, set “BASS” to “OFF” (page 23).
• When recording to an externally connected
equipment, press VOL +/– repeatedly to
adjust the volume level until “VOL 27”
appears in the display, which is optimum for
recording to an externally connected
equipment.
A B
Elapsed time Track number
Remaining time of
the current track Track name
Remaining time
after the current
location Disc name
A B
HOLD
Portable DAT
recorder, etc. Stereo system,
etc.
to LINE IN
2 phono plugs
L
(white)
Stereo mini-plug
R (red)
RK-G129
(not
supplied)
to i
RK-G136
(not supplied)