Sony MZ-R501 - Manual (Page 29)

29
Note
You cannot add track marks during synchro-
recording.
Erasing a track mark
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
1
While playing the track with the track
mark you want to erase, press X to
pause.
2
Find the track mark by pressing .
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. “00:00” appears in the display.
“MK 003” appears in the display for
2 seconds.
3
Press T MARK to erase the mark.
“MK OFF” appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark and name
assigned to the mark are also erased.
Note
You cannot erase a track marks according to the
system limitations. For details, see “System
limitations” (page 35).
1 3 4 2
1 3 2
Erase a track mark
Track numbers decrease
T MARK
X
.