SMC Networks Barricade SMC7004AWBR - Manual (Page 61)

5-1
C
HAPTER
5
C
ONFIGURING
C
LIENT
TCP/IP
If you have not previously installed the TCP/IP protocol on your
client PCs, refer to the following section. If you need information
on how to configure a TCP/IP address on a PC, refer to “Setting
TCP/IP to Work with the Barricade” on page 5-3.
Installing TCP/IP Protocol in Your PC
1. Click the Start button and choose Settings, then click Control
Panel.
2. Double click the Network icon and select the Configuration tab
in the Network window.
3. Click the Add button to add the network component to your PC.
4. Double click Protocol to add the TCP/IP protocol.