SMC Networks Barricade SMC7004AWBR - Manual (Page 79)

T
ROUBLESHOOTING
A-3
Mobile users cannot
access the Wireless
Barricade • Make sure that the Wireless Barricade and all
mobile users are configured to use the same
radio channel, wireless domain (SSID), and
encryption keys.
• Ensure that all mobile users are within range of
the Wireless Barricade as specified in Appendix
C.
Management Problems
Cannot connect using
the Web browser • Be sure to have configured the Wireless
Barricade with a valid IP address, subnet mask
and default gateway.
• Check that you have a valid network connection
to the Wireless Barricade and that the port you
are using has not been disabled.
• Check network cabling between the
management station and the Wireless Barricade.
Forgot or lost the
password • Press the RESET button on the rear panel to
restore the factory defaults.
Printer Server
The printer cannot
print or prints garbage • Make sure the parallel cable between the
Wireless Barricade and printer is connected and
is in good condition
Troubleshooting Chart
Symptom Action