Chapter 6 configuring printer services, Install the printer port monitor, Configuring printer services -1 – SMC Networks Barricade SMC7004AWBR User Manual
Page 69: Install the printer port monitor -1, Hapter, Onfiguring, Rinter, Ervices
6-1
C
HAPTER
6
C
ONFIGURING
P
RINTER
S
ERVICES
If you want to use the print server built into the Wireless
Barricade, then you must first install the Port Monitor program as
described in the following section for Windows 95/98/ME/NT/
2000.
To configure the Wireless Barricade Print Server for Windows
95/98/ME/NT/2000 or Unix, see “Configure the Print Server” on
page 6-4.
Install the Printer Port Monitor
Skip this section if you are using Unix.
For Windows 95/98/ME/NT/2000 clients, you need to install the
port monitor program as described in this section.
1. Insert the installation CD-ROM into your CD-ROM drive. Under
the PrintSvr directory, run the “setup.exe” program. The SMC
Port Monitor installation program advises you to close all other
Windows programs currently running on your computer. Click
Next to continue.