Choosing the best location, Installing the anti-vibration pads, Getting started using the remote – Sony SA-VA10 User Manual

Page 7

Advertising
background image

7

GB

Getting Started

Using the remote

You can use the shaded buttons shown below to
operate Sony TVs.

To

Press

turn on a Sony TV

TV POWER

operate a Sony TV

the button(s) for the operation

you desire.

turn off a Sony TV

TV POWER

Choosing the Best Location

To obtain high sound quality and a proper sound
image from the front speakers, place the speaker with
the built–in operation panel to the left of your TV and
the other to the right of your TV so that the centre
channel tweeters angle towards the centre of the room.

For the best central sound image, place the left and
right speakers within 1.5 m of each other and
equidistant from the TV.
The left and right speakers must be placed standing
upright, laying them on their sides will defeat the
centre channel surround effect.

Place the rear speakers so that they fire directly across
at each other about 60 – 90 cm (2 – 3 feet) above your
listening position.

1.5 m (5 feet) max

+

60 – 90 cm

(2 – 3 feet)

Installing the Anti-vibration
pads

1

Spread a towel, or other soft cloth, over a table
and lay the speakers down.

2

Peel off the covering sheet from the anti-vibration
pad and attach it on the bottom of the speakers (4
for each speaker).

3

Make sure the anti-vibration pads are securely
attached and stand the speaker upright.

Advertising