Sony SA-VA10 - Manual (Page 8)

8 GB
1
Twist the speaker cord coating and strip it from
the end of the cords.
2
Insert the stripped wire into speaker terminals.
Be sure to connect matching speaker terminals
(e.g. use the striped wire to connect + to +, and
use the solid wire to connect – to –). If the
connections are reversed (+ to –), the sound will
be distorted and lack bass.
+
–
REAR SPEAKER
R L
Speaker System Hookups
This section describes how to connect the speaker system and how to connect your TV or VCR to the speakers.
The arrow ç indicates signal flow.
Getting Started
STEP 1 Connecting the front speakers
STEP 2 Connecting the rear speakers
Use the supplied speaker cord to connect the left and
right rear speakers.
R-ch SPEAKER
INPUT
R-ch SPEAKER
OUTPUT
right speaker left speaker
To connect, depress the
middle of the male
connector until it clicks
into the female connector. To disconnect, pull the
connector out. Never pull
the cord itself.
VCR
TV
STEP 3
left right
STEP 1
STEP 4
Rear speaker
SS-SR151
Rear speaker
SS-SR151
STEP 2
Left front
speaker
Right front
speaker