External connections, Video 2 component jacks (set-top box), Connection option 1 – Sanyo HT27547 User Manual
Page 15: Video2 component jacks, Helpful hints (problems/solutions)
15
SET-TOP BOX
(HD Satellite, HD Cable, etc.)
1
Connect a Component Cable to the VIDEO2 Green,
Blue, and Red video jacks.
2
Connect an Audio Cable to the matching VIDEO2
White and Red audio jacks.
3
Press INPUT to select Video 2 to view the program.
Note:
Audio / Video Input (VIDEO2) and Component inputs share
the same audio (R/L) input jacks.
VIDEO2 COMPONENT JACKS:
Connection Option 1
GREEN, BLUE, RED VIDEO
JACKS
CONNECTING A SET-TOP (STB)
DTV VIDEO2
AUDIO L / R
JACKS
OPERATING TIP:
Refer to the owner’s manuals and user’s guides
that came with your external equipment for
connection options.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM
CHECK THESE CONDITIONS
TRY THESE SOLUTIONS
“No Signal” will appear randomly
on the screen when no signal is
detected at the video jacks.
●
Check Audio / Video connections.
●
Check external equipment
connections.
●
Check external equipment
setting.
●
Press the INPUT key.
●
Switch on external equipment.
●
Set external equipment output
connections to match input
connections.
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
❶
❷
REMOTE CONTROL
❸
INPUT