Sanyo HT27547 - Manual (Page 19)

19
CONNECTING ANALOG CABLE, VCR, AND AN ANTENNA TO THE DTV
VIDEO2 COMPOSITE (ANALOG) JACKS: Connection Option 2
VCR
1 Connect Analog Cable system to the VCR
“Antenna In.”
2 Connect the VCR AV out jacks to VIDEO2 Yellow,
White, and Red jacks.
3 Press INPUT to select Video 2 to watch Analog
Cable channels OR to TV channels to watch
Antenna channels.
4 Select channels with the VCR’s remote control.
Select Antenna channels with the DTV remote
control.
IMPORTANT FACTS:
Composite jacks offer only 480i (SDTV ) resolution.
YELLOW,
WHITE, & RED,
JACKS
“No Signal” will appear randomly
on the screen when no signal is
detected at the video jack. ● Check Audio / Video connections.
● Check external equipment
connections.
● Check external equipment
setting.
● Press the INPUT key.
● Switch on external equipment.
● Set external equipment output
connections to match input
connections.
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
DTV VIDEO2
CABLE SYSTEM
(Service provider)
OPERATING TIP:
Refer to the owner’s manuals and
user’s guides that came with your
external equipment for connection
options.
❶
❷
REMOTE CONTROL
INPUT
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
❸