Sanyo HT27547 - Manual (Page 24)

24
REMOTE CONTROL OPERATION
➀
➁
➂
➃
➀
Input Key—Press to select the program source to
watch: Analog Channels, Digital Channels, Video 1,
Video 2, Component2, or Analog Channels..
➁
Number Keys—Press two keys to select a channel.
Example: Press 0 then 6 to select channel 6.
For Analog Cable channels above 100, press and
hold the 1 key until C1-- appears, then press the
other two numbers.
➂
Info Key—Press to display the Digital and Analog
Full Banner information. The banner contains the fol-
lowing: program title, station ID, program rating,
signal strength, channel number, tuner ID, and audio
information.
➃
Recall Key—Press to switch between the last two
channels selected. The Recall key cannot toggle
between a Digital channel and an Analog channel.
➄
Menu Navigational Keys:
Menu—Press to display on-screen menu.
Cursor
▲ (up) ▼ (down) keys—Press these keys to
move the cursor up and down within the menu.
Cursor < (left) > (right) keys—Press these keys to
move the cursor left and right within the menu.
Enter Key—Press to select an option from the menu
system, when required.
Exit Key—Press to exit from the menu system.
(CONTINUED ON NEXT PAGE.)
➠
POINT
TOWARDS TV
DIGITAL INFO BANNER
ANALOG INFO BANNER
➄