Sony HMZ-T1 - Manual (Page 19)

19
Display
3D Display Manually select the display format for 3D content. Available
settings vary depending on whether the source signal includes a
3D format identification signal, as follows.
For 3D content without a 3D format identification
signal
Over-Under: Select for top-and-bottom 3D content, with
similar images displayed on top and bottom.
Side-by-Side: Select for side-by-side 3D content, with similar
images displayed side by side.
Off: Select to display content in 2D format.
For 3D content with a 3D format identification signal
On: Select to display content in 3D format.
Off: Select to display content in 2D format.
• If 3D content is not displayed correctly using the selected settings, try
changing “Over-Under” to “Side-by-Side” or vice-versa.
• When selecting “Over-Under” or “Side-by-Side,” change the setting to
“Off” after viewing 3D content.
Auto 3D On: Automatically switches to 3D display mode when a 3D
format identification signal is detected. If the 3D format
identification signal is no longer detected, the system will
automatically switch to 2D display mode.
Off: Deactivates this function.
• If images do not appear in 3D when “Auto 3D” is set to “On,” try
changing the “3D Display” setting.
3D Signal
Notification On: Notifies you when a 3D format identification signal is
detected.
Off: Deactivates this function.
Back Returns to the previous menu.
Picture Mode Vivid: Vivid colors and sharp contrast, for concerts, sports, and
other televised content.
Standard: Emphasizes a natural picture. Standard picture
quality for a variety of video sources.
Cinema: Picture quality designed especially for cinematic
content.
Custom: Stores your customized preferred picture quality,
adjusting from original flat picture.
Notes
Note