Sony HMZ-T1 User Manual

Page 23

Advertising
background image

23

Guide of HDMI device control

Displays the operation guide for head mounted unit buttons that can be used with “Control for
HDMI” function (page 22).

Power off when
unmounted

On: Turns the system off automatically 30 minutes after you

take the head mounted unit off.

Off: Deactivates this function.

• Regardless of this setting, the screens will go off automatically

10 seconds after you remove the head mounted unit.

Illumination

On: Activates the illumination on the head mounted unit.
Off: Deactivates this function.

Language setting

Sets the language used for menus and other interface elements.

• Audio is muted while this setting is configured.
• The volume cannot be adjusted while this setting is configured.

Prolonged viewing
warning

On: Activates automatic display of a warning about whether to

turn the power off after 3 hours of continuous viewing.
Selecting “Yes” on the warning screen will turn the power
off. Selecting “No” will cause the power to be turned off
3 hours later, after 6 hours of continuous viewing.

Off: Deactivates this function.

• When the warning is displayed after 3 hours of viewing, if no response

is made in 90 seconds, the power will automatically be turned off.

• A warning screen will be displayed at 30 minutes and 5 minutes before

the system will turn itself off.

Startup viewer
warning

On: Activates automatic display of a startup warning.
Off: Deactivates this function.

Reset to factory
settings

Resets all settings to the original default values.

• The password set in “Set password” (in “General Setup”) will also be

cleared.

Tip

Notes

Notes

Note

Advertising