Konica Minolta BIZHUB 920 - Manual (Page 60)

6. TOE Summary Specification
6.1. TOE Security Function
6.1.1. Identification and Authentication Function
The identification and authentication function provides the following a group of security functions.
Function title Specification of security function
TOE security
functional
requirement
IA.ADM_ADD
Registration of
administrator
IA.ADM_ADD registers the administrator in the TOE.
Only the CE operates IA.ADM_ADD. The CE registers
the administrator password.
IA.ADM_ADD provides the interface for administrator
registration. It requests to enter the applicable password to
the administrator who is registered.
For the password entered by the administrator, the
permitted value is validated according to the following
rules.
- Password of 8 characters
- Password of English characters, one-byte capital letters,
small letters, and numerals
- Prohibition of the same password with that used one
generation ago
In the validation of permitted value, the administrator is
registered if the rules are obeyed, and it is rejected if not
so.
FIA_SOS.1[2]
FMT_MTD.1[1]
FMT_SMF.1
FMT_SMR.1
FPT_RVM.1
IA.ADM_AUTH
Identification
and authentica-
tion of administ-
rator
Before the operator uses the TOE, IA.ADM_AUTH
identifies that he/she is the registered administrator in the
TOE and authorizes that he/she is the valid administrator.
IA.ADM_AUTH does not permit to operate all the
management functions before the identification and
authentication of administrator. The interface for the
identification and authentication of administrator requests
to enter the password registered in IA.ADM_ADD and
FIA_UID.2
FIA_UAU.2
FIA_UAU.7
FIA_AFL.1
FPT_RVM.1
Copyright© 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved