Kohler Tellieur 86216 2 BA - Manual (Page 3)

86216Ć2Ć BA (Ć ) 3 Kohler Co., Kohler, WI
INSTALLATION TO A
FREEĆSTANDING BASE
6.
Carefully turn the storage case
over so the bottom of the storage
case is facing up.
Place the base upside down onto
the storage case.
Make sure that the edges of the
back legs are flush with the back
and sides of the storage case.
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
7.
Insert screws into the holes in
the corner brackets of the base.
Secure the base to the storage
case.
Carefully turn the assembly
rightĆside up and position where
desired.
Insert Screws
Here
8.
Verify that the storage case is
level, both frontĆtoĆback and
sideĆtoĆside. If the storage case is
not level, adjust by turning the
leveling feet as needed.
Make sure the storage case is
supported by all four feet and
does not rock.
Foot
Leg
Leveling
Foot