Kohler Tellieur 86216 2 BA - Manual (Page 4)

86216Ć2Ć BA (Ć ) 4 Kohler Co., Kohler, WI
INSTALLATION TO A
WALLĆMOUNT BASE
9.
Carefully turn the storage case
over so the bottom of the storage
case is facing up.
Place the base upside down onto
the storage case with the two
legs toward the front of the
cabinet.
Make sure the back rail is flush
with the back and sides of the
storage case.
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
ЕЕЕЕЕ
10.
Insert screws into the holes in
the corner brackets of the base.
Secure the base to the storage
case.
Carefully turn the assembly
rightĆside up and position
against the wall where it is to be
installed.
Insert Screws
Here
11.
Verify that the storage case is
level, both frontĆtoĆback and
sideĆtoĆside. If the storage case is
not level, adjust by turning the
leveling feet as needed.
Make sure that the storage case
is supported by both feet and
does not rock.
Foot
Leg
Leveling
Foot