Kohler Tellieur 86216 2 BA - Manual (Page 7)

86216Ć2Ć BA (Ć) 7 Kohler Co., Kohler, WI
INSTALLING STORAGE CASES
SIDEĆTOĆSIDE
15.
NOTE : Make sure to drill each
cabinet separately. Do not try to
drill through both storage cases
at once.
NOTE
: Make sure to drill
through the same sets of
partially drilled holes in each
storage case so they will line up
properly.
Decide which sides of each
cabinet will be connected to the
other. Drill through the top and
bottom sets of holes on the
inside of both storage cases from
inside toward the outside. Make
sure to only drill through the
side that will be facing the other
storage case.
Connect the two storage cases
with four 5 mm tapped sleeve
connectors (not provided)
through the drilled holes.
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕЕ
ЕЕЕЕ
ЕЕЕЕ
ЕЕЕЕ
ЕЕЕЕ
INSTALLING STAINLESS STEEL
OR STONE TOP (OPTIONAL)
16.
Apply an ample amount of
silicone sealant or construction
adhesive to the center of the top
of the storage case.
Place top on storage case making
sure the back and side edges of
the top are flush with the
storage case.
Press firmly in place.
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕ
ЕЕЕ
Silicone Sealant or
Construction Adhesive
Top