Kawasaki BRUTE FORCE R8126 - Manual (Page 7)

7
Children can be harmed by small parts, sharp edges
and sharp points in the vehicle's unassembled
state, or by electrical items. Care should be taken
in unpacking and assembly of the vehicle. Children
should not handle parts, including the battery,
or help in assembly of the vehicle.
WARNING
• Turn the vehicle upside down.
• Fit the front end to the vehicle. Make sure the sides of the front
end wrap around the vehicle. You may need to check this for
assembly steps 2 -5.
• Plug the charger connector into the battery A .
• Plug the charger into a standard wall outlet B .
Notes:
- Use the charger only in a wall outlet. Do not plug the AC
adaptor into a ceiling outlet.
- If power flow to the wall outlet is controlled by a switch,
make sure the switch is “ON”.
• Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of
your vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector
from the battery. Unplug the charger from the wall outlet. The
battery is now ready to be installed in your vehicle. Please
see the Battery Installation section on page 12 for detailed
instructions on installing your battery. If your battery is already
installed in your vehicle, simply re-connect the motor harness
connector to the battery.
Battery
Charger
Connector
FRONT VIEW 1
Front End
ASSEMBLY
A
B
Vehicle
R8126a-0920