Kawasaki BRUTE FORCE R8126 - Manual (Page 9)

9
Steering Column
Opening
• Fit a 3 /
16
" washer onto the #8 x 2" screws.
• Insert the screws with washer into the base plate plate and tighten.
• Turn the vehicle upright.
8
BACK VIEW 9
• Insert the handlebar steering column down through the opening
in the front end of the vehicle. Be sure to fit the steering column
through the opening in the base plate and the hole in the steering
linkage (underneath the vehicle).
• Push to “snap” the handlebar into the vehicle.
BOTTOM VIEW BOTTOM VIEW
• Position the base plate with the ribbed side facing out.
• Fit the narrow end of the base plate under the steering linkage
and into the slot in the front end.
Base Plate
6
7
Front End Slot
Steering Linkage
• Insert two #8 x 3 / 4 " screws though the front end and into the base
plate. Tighten the screws.
R8126a-0920