Kawasaki BRUTE FORCE R8126 - Manual (Page 8)

8
• Fit another #8 x 3 / 4 " screw through the hole shown in the front end
and into the vehicle. Tighten the screw.
Hint: You may need to adjust the front end to align the holes.
3
• Grasp the bar on the front end and pull it out and up to properly
position the front end.
4
5
Bar
#8 x 3 /
4
" Screw
• Now, fit eight more #8 x 3 /
4
" screws into the remaining holes in the
front end and tighten them.
Hint: You will need to turn each wheel (one at a time) to fit all of
the screws.
• Fit a #8 x 3 / 4 " screw through the hole shown in the front end and
into the vehicle. Tighten the screw.
2 BOTTOM VIEW
#8 x 3 / 4 " Screw
R8126a-0920