Kathrein UFD 346 - Manual (Page 18)

Selecting TV Programs
18
The LO-Frequency groups are also used for satellite identification when our Auto-
matic-Positioner HDP 160 is running a fully automatic set-up.
The individual satellites have been assigned the following LO groups:
Satellite LO-group
Astra LO 1
Eutelsat 13° LO 2
Eutelsat 10° LO 3
Eutelsat 16° LO 4
See the Basic Setting-up menu for changing the LO frequencies.
Decoder menu
You may connect a Pay-TV program decoder to the decoder scart-socket.
The receiver recognises Pay-TV programs, by the switching signal generated by
the decoder (i.e. Premiere) and switches this signal though to the TV and VCR
scart-socket.
For decoders that do not generate switching voltages, the following settings are
available.
•
Call-up the video setting-up menu,
•
Select ”Decoder menu” from the option list,
•
Activate ”Decoder menu”,
•
Set video-signal path to external,
•
Set the audio-signal path to external only if the audio signal is also encrypted.
Important If you are connecting to a decoder that requires a basic band signal with PAL or
MAC de-emphasis, then the aforementioned de-emphasis (PAL or MAC) may be
selected from the menu option ”Signal Type” (see ”Decoder” section).
•
Save your settings by pressing this twice.
Program Name
You may enter a 5 character program name of your choice in the line ”Program
Name”.
•
Press this button to select ”Program Name” from the menu options.
•
Use these buttons to select the 1
st
character.
•
Use this button to change to the next character.
•
Using the above method to select the remaining characters.
•
Use this button to change to the ”Audio menu”
or
•
Save your settings by pressing this button twice.
•
Press this button to return to the receive mode.