Kathrein UFD 346 - Manual (Page 19)

Selecting TV Programs
19
The ”Audio” Menu
The following settings may be made from within the audio menu:
P002
ZDF
TV tone
Mode: Stereo
Frequency: „ „7.02/7.20 MHz
De-emphasis: DNR/75 µµ s
0-9 VOL VID A/B STOR STBY
Audio modes
Select one of the following modes: ”Stereo”, ”Mono-narrow” or ”Mono-wide”. The
modes ”Stereo” and ”Mono-narrow” are set when the sub-carrier is received and
”Mono-wide” is set when the main carrier is received.
Audio frequency
The 3 digit audio frequency in the range 5.00 to 8.80 MHz. may be entered by us-
ing the number buttons In stereo-mode, the frequency for the left
channel is entered and the frequency for the right channel is automatically set at
180 KHz. above the left channel.
Use these buttons to select pre-installed audio frequencies. The audio fre-
quencies are listed in the following tables:
Mode Sound carrier frequen-
cies Mode Sound carrier frequen-
cies
Stereo
Mono
(wide)
MWD
7.02 / 7.20 MHz
7.38 / 7.56 MHz
7.74 / 7.92 MHz
8.10 / 8.28 MHz
5.80 MHz
6.50 MHz
6.60 MHz
6.65 MHz
6.80 MHz
Mono
(narrow)
MNR 7.02 MHz
7.20 MHz
7.38 MHz
7.56 MHz
7.74 MHz
7.92 MHz
8.10 MHz
8.28 MHz
Audio De-emphasis (”mono-wide” mode only)
For the best de-emphasis sound quality select 50
µ
s or J17 on.
”Stereo” and ”Mono-narrow” modes automatically select de-emphasis DNR and 75
µ
s.
Stereo, Mono-narrow: DNR, 75
µ
s
Mono-wide: 50
µ
s or J17
•
Save your settings by pressing this button twice.
If you wish to set-up further program channels:
•
Press this button to change to ”Video-menu”.
•
Go to the first menu line ”Channel number” and select the next program chan-
nel.
•
Select further program channels by using the above method.
•
Exit the set-up menu by pressing this button.