Using the external battery case – Kenwood DPC-X937 User Manual

Page 14

Advertising
background image

14

DEUTSCH

IT

ALIANO

ESP

AÑOL

Using the external battery case

(DPC-X937 only)

1

Attach the
external battery
case to the
main unit

÷ When attaching the external battery case to the main

unit, be sure to align the orientation of the plug be-
fore inserting it. (See the figure.)

÷ Rechargeable batteries inside the unit cannot be

charged while the external battery case is attached.

2

Open the batteries
cover.

3

Insert 2 alkaline
batteries and close the
cover.

÷ Make sure the positive ª

and negative

· poles are

properly aligned.

÷ Use two commercially sold AA alkaline batteries with the

external battery case.The unit may not operate normally if
manganese batteries are used.

÷ When carrying the external battery case without attach-

ing it to the main unit, remove the batteries from the
case. If the case containing batteries is put in a pocket or
bag together with a metallic object such as a key holder,
the + and - terminals of the battery case may be shorted
due to contact with the metallic object.

÷ The battery case can be used simultaneously with the

batteries inside the unit to extend the overall playback
time.

To EXT BATT jack

2

1

*5378_08_15EN

03.7.3, 2:11 PM

14

Advertising
This manual is related to the following products: