Kenwood DPC-X937 - Manual (Page 32)

32
DEUTSCH
IT
ALIANO
ESP
AÑOL
When the set time has elapsed
The alarm tone is generated for about 1 minute to notice the end of the set time period. At this time when vol-
ume is large , volume decreases automatically. Please adjust volume when alarm stops (or after stopping alarm).
To stop the alarm tone, press any key on the remote control or main unit.
To check the time till the alarm tone is generated
Press the MENU key repeatedly until " " is displayed together with the time left till the alarm tone.
To change the set time
Press the MENU key repeatedly until " " is displayed, and then perform the operation in step 2 .
To cancel the alarm mode after setting it
To exit from the alarm mode before the set time has elapsed, press the MENU key repeatedly until " " is dis-
played, and then perform the operation in step 2 to select "OFF".
The alarm mode is also exited when the power is turned off (page 19) before the set time has elapsed.
*5378_25_38EN 03.7.3, 2:19 PM 32