Kyocera FS-C5016N - Manual (Page 10)

8
KPDL error ##
Press GO
Current print processing cannot continue
because of occurrence of KPDL error
which is categorized by ##. To print out an
error report, display > Print KPDL
err(s) from the menu system, and select
On. Press the GO key to resume printing.
You can abandon printing by the CANCEL
key.
If Auto Continue is set to On, printing will
be automatically resumed after a preset
period of time. For details on Auto Con-
tinue, refer to chapter 3 of the Operation
Guide.
Load Cassette #
(A4)/(PLAIN) †
The paper cassette matching the paper
size and paper type of the print job is
empty. Load paper into the paper cassette
indicated by #. Press the GO key to
resume printing.
If you want to print from a different paper
source, press the V or U key to display
Use alternative and you can change
the source for paper feeding. After select-
ing a paper source and pressing the
MENU key, Paper Handling >
appears. By pressing the U key, the paper
type settings menu appears. After setting
the correct paper type, press the ENTER
key and printing starts. For details, see
chapter 3 of the Operation Guide.
Message Corrective Action
FSC5016N_QG.fm 8 ページ ２００３年３月２４日 月曜日 午後１時４７分