Kyocera FS-C5016N - Manual (Page 39)

37
Cleaning the
main charger
wire — Grasp the
tab of the green
wire cleaner knob.
Gently pull the
wire cleaner out
and push it back
in. Repeat this 2
to 3 times.
After cleaning, make sure you restore the wire cleaner
knob to its home position.
If the wire cleaner knob is not restored to its
home position, a band will print along the length
of the page.
Cleaning the
main charger
grid — Take the
grid cleaner out of
the toner kit. Take
the grid cleaner
out of the protec-
tive bag and
remove the cap.
2
Wire Cleaner Knob
Note
3
Cap
Grid Cleaner
FSC5016N_QG.fm 37 ページ ２００３年３月２４日 月曜日 午後１時４７分