Kyocera FS-C5016N - Manual (Page 37)

35
Cleaning the Printer
The following parts must be cleaned each time the
toner container is replaced:
•
Main charger wire
• Main charger grid
• Registration roller
In addition to this, it is recommended that the main
charger wire and registration roller are cleaned periodi-
cally at least once a month.
Cleaning the Main Charger Unit
The main charger units need to be cleaned periodically
as they get contaminated with dioxide after long usage.
Each main charger unit is comprised of two main parts
— the wire and the grid — which should be separately
as explained below.
FSC5016N_QG.fm 35 ページ ２００３年３月２４日 月曜日 午後１時４７分