Kyocera FS-C5016N - Manual (Page 14)

12
Print overrun
Press GO
††
The print job transferred to the printer was
too complex to print on a page. Press the
GO key to resume printing. (The page may
break in some pages.).
You can abandon printing by the CANCEL
key.
If Auto Continue is set to On, printing will
be automatically resumed after a preset
period of time. For details on Auto Con-
tinue, refer to chapter 3 of the Operation
Guide.
RAM disk error##
Press GO
A RAM disk error has occurred. Look at
the error code given in place of ## and
refer to chapter 4 of the Operation Guide.
To ignore the RAM disk error, press the
GO key.
Replace toner
C, M, Y, K
Replace toner
Clean printer
Two message items are displayed alter-
nately. Toner has run out in the toner con-
tainer(s). Replace the toner container
using a new toner kit for the particular
color. The printer does not operate when
this message is displayed.
For example, if Replace toner C,K is
displayed, replace the cyan and the black
toner containers.
Set paper
Press GO
The MP tray is out of paper. Load paper
and press the GO key. (Note that feeding
the paper having a paper size which does
not match the current paper size from the
MP tray can cause paper jam.)
Toner low
C, M, Y, K
Replace the toner container using a new
toner kit. Color of the toner container that
needs to be replaced is represented by
C (Cyan), M (Magenta), Y (Yellow), and
K (Black).
Message Corrective Action
FSC5016N_QG.fm 12 ページ ２００３年３月２４日 月曜日 午後１時４７分