KORG K49 - Manual (Page 9)

9
Owner’s Manual
4
Set the power switch to the DC position. The power LED will light. When the power
is turned on, the most recently saved settings will be recalled automatically.
5
Turn on any external MIDI sound modules connected to your K-Series controller.
MIDI IN
MIDI OUT
Pedal switch
MIDI cable
External MIDI sound module
PEDAL jack
Power switch position
Plug the AC
adaptor into
an AC outlet
Power supply connector
6
When you are ready to turn off the power, turn off any external MIDI sound mod-
ules first, and then set the K-Series power switch to STANDBY.
Using the internal sound engine [K61P only]
1
Connect the plug of the optional AC adapter to the K-Series power connector, and
plug the adapter into an AC outlet.
2
Using standard instrument cables with 1/4” plugs, connect the output jacks on the
K61P to the inputs of your audio monitor system or audio recorder. When connect-
ing only one output, use the L/MONO jack only.
Use the volume knob to adjust the level of the OUTPUT jacks.
3
Set the power switch to the DC position. The power LED will light.
4
Turn on your connected audio monitoring system.
Headphone
Amplified speakers HEADPHONES jack OUTPUT jack
INPUT