Controls, displays and connections, Front panel rear panel connections, Remote control handset keys – Kathrein UFD 345 User Manual
Page 4
Controls, displays and connections
4
Front panel
Rear panel connections
1
Location slot for infrared sensor
2
Detachable infrared sensor
Receiver for infrared signals from the remote control.
The detachable infrared sensor allows the receiver to be in-
stalled hidden from view. All that is necessary is for the in-
frared sensor to be within the reception area of the infrared
signals from the remote control.
3
On/Off indicator (red LED)
In standby the indicator goes out
4
Programme selection keys
Step-by-step programme selection (upwards and down-
wards).
Switch-on from standby by pressing both buttons simulta-
neously.
Switchover from TV- to radio mode by pressing both but-
tons simultaneously. .
1
Satellite IF signal input and
output of LNB supply voltage
2
Connecting socket for infrared sensor (Western 8-way)
3
Scart socket, TV connection
4
Scart socket, VCR connection
5
Scart socket, decoder connection
6
Connecting socket for voltage supply
12 ... 24 V DC
Remote control handset keys
Function 1:
On/Off (Standby),
Attention: no mains isolation results!
Function 2:
Resetting from setup menu into normal operation
Key to call up picture optimisation menu if reception is
poor
to
Numeric keys 0 - 9 for programme selection and
frequency entries
Function 1:
Command set changeover
Function 2:
Blanking of video signal (in setup mode)
Function 1:
Volume control
Function 2:
Selection of individual menu entries in setup mode
Function 1:
Switchover to radio mode
Function 2:
Calls up menu for radio settings
(with
in succession)
Function 1:
Calls up the Info menu
Function 2:
Calls up menu for “Programme slot swapping, in-
sertion and copying”
(with
in succession)
Function 1:
Steps through programmes either up or down
Function 2:
Changing data in setup mode
Function 1:
Mutes the sound
Function 2:
Calls up menu for audio settings
(with
in succession)
Function 1:
Saves the chosen settings
Function 2:
Primary key for calling the separate setup menus
(e.g. video settings)
Unassigned
Stereo/Mono- (2 channel) changeover
Function 1:
Selects TV/SAT mode
Function 2:
Calls up menu for video settings
(with
in succession)