Kensington MP-700 - Manual (Page 24)

24
■ About RGB Video Output
●
Signal timing
The following shows the timing that signals are output from the RGB video output terminal.
(XGA 60Hz speed or equivalent)
The video signal output is determined by whether “PC/OHP” or “OHP” is selected in “RGB-
OUT Selection” on the “Setting 2” menu. See page 46 for more information.
Vertical
sync signal Horizontal
sync signal
r i
e u
w y
q t
Horizontal
sync signal
Vertical
sync signal
Scan mode Non-interlaced
q Cycle 20.677 µs
w Sync signal width 2.092 µs
e Back porch 2.462 µs
r Display interval 15.754 µs
t Cycle 806 H
y Sync signal width 6 H
u Back porch 29 H
i Display interval 768 H
NOTE
• The screen is sometimes not displayed normally depending on the monitor or projector that is connected.
• Images from a PC are output in standby.
Cha.04 04.7.29, 11:45 AM 24