Kensington MP-700 User Manual
Page 37
37
Basic Operation
Displaying OHP stored image
Pressing the
buttons display and switch the stored images in the internal memory.
button: Displays the image previous to the stored image that is currently displayed.
button: Displays the image following the stored image that is currently displayed.
* Pressing the
button while a stored image is not displayed causes the most recently
refreshed image that was stored to be displayed.
When you press the REFRESH button and the image freezes, a maximum of eight pages of
the OHP images are stored on the internal MP-700 memory.
Press the POWER button, then after selecting OHP mode, the image of the first frozen image
is stored to position q in the diagram below. After that, every time you refresh the display the
images are stored in the internal memory. When the stored images exceed the maximum of
eight images the oldest images are overwritten in the order shown in the diagram below
(starting from q).
q
w
e
r
i
u
y
t
Cha.05-1
04.7.29, 11:47 AM
37