Kensington MP-700 User Manual
Page 7
Advertising
7
• Care of the power cord and plug
•
Do not put the power cord near a heater.
Doing so could cause the sheath of the cable to melt down, resulting in fire or
electric shock.
•
Do not connect or disconnect the power cord with wet hands. Doing so could
cause electric shock.
•
Be sure to pull out the power cord and disconnect any cable connections
between units and release the anti-theft lock before moving the projector.
Moving the projector with cables connected may cause fire or electric shock if
the cables are damaged.
•
If you do not plan to use the projector for a long time, disconnect the power
cord for safety.
• DO NOT REMOVE ANY SCREWS except the lamp cover screw and two lamp
unit screws. You could receive an electric shock.
Cha.01
04.7.29, 11:43 AM
7
Advertising