Kensington MP-700 - Manual (Page 60)

60
Remote Control Operation
Main Unit Operation
Use Images Saved on the CF Card as Wallpaper to Mute the Projected Image
1
Do steps 1 through 4 in “Display Images Saved on the CF Card” then do
slide display for the image you want to display as the wallpaper when the
image is muted.
2
Press the
MENU
button (or the
MENU
button on the
remote control) and then select “Save wallpa-
per” on the Quick menu and then press the
SET
POINTER button (or the POINTER/
SET button on the remote control).
A confirmation message appears, select “YES” and then press
the
SET
POINTER
button (or the POINTER/
SET button on the remote control)
NOTE
• You can save wallpaper from the images that have been saved on the CF Card as many times as you want, but
the old wallpaper will be deleted from the internal memory. Also, the saved wallpaper will not be deleted even if
you turn off the power button.
• If you save an image for wallpaper that has been zoomed, then only the zoomed portion will be saved. Because
of this, the picture quality of the image set as the wallpaper may be degraded. Also, the picture quality may be
degraded due to the compression rate.
• If you do not set “Wallpaper” in “Mute mode” on the “Setting 2” on the menu (page 46) after you have saved the
image as wallpaper, it will not be displayed as wallpaper when the image is moted.
MENU
MENU
POINTER/
SET
SET
POINTER
Quit
QUICK MENU
CF thumbnail
Display the next slide
Display the previous slide
Store wallpaper
Cha.05-3 04.7.29, 11:46 AM 60