Kathrein UFD 400 - Manual (Page 13)

Receiver operation
13
•
Alter the values step-by-step using the keys.
Saving the settings
After entering the time press the key to start the clock.
Return to receive mode
•
Press the key to return to receive mode.
or
•
Press the key to continue with the timer programming.
Timer setting
The unit is in normal mode.
•
Press the key twice to call up the menu for the timer settings.
The following screen display appears:
In this menu you can make timer settings in order to start the receiver simultane-
ously with a video recorder (e.g. for recordings).
The bottom menu line shows keys you can use to make the settings.
Meaning of the columns
Date Switch-on date.
Start Start-time for automatic switch-on.
Stop Switch-off time.
No. Number of programme slot.
Making settings
After calling up the timer menu the cursor is positioned at the input line. The active
menu entry is shown by means of a flashing cursor (>).
•
For step-by-step input use the keys.
or use the numeric keys ... for direct input.
•
When using the numeric keys for input, the day/month and hour/minute entries
must always be entered in two-digit form, thus “02.01." or “08:05" (not “2.1." or
“8:5"). If one of the columns of the input line already contains a value, the
keys can also be used to adjust the setting.
Following correct data entry the cursor jumps to the next column.
•
To enter a radio programme slot press the key first of all.
Saving settings
•
Press the key in order to save your settings.
The values entered are placed in the topmost line of the display. The other entries