Kyocera G2GO - Manual (Page 68)

68 Sounds
– View Ringer Shuffle
1. From Ringer Shuffle, select View. Only the
files used in your shuffle appear.
2. Select Edit to modify the shuffle list or
press the Back key to exit.
Set Ringer Mode
Your phone is set to make sounds when you
receive calls, press keys, navigate through
menus, and receive alerts (such as new
messages). You can silence all sounds and set
the phone to vibrate or light up when you
receive calls and alerts.
From Ringer Mode, select one of the
following:
•
Normal Sounds rings for the incoming call
or alert (in effect, returning the phone to a
non-silent mode).
• Vibrate Only vibrates for the duration of
the incoming call or other alerts.
• Vibe Then Ring vibrates for the first ten
seconds and then rings for the remainder of
the incoming call alert.
• Lights Only lights up for the duration of the
incoming call or other alerts.
You can also press and hold the Space key to
toggle between Vibrate Only mode and
Normal Sounds mode.
Note: The phone rings when attached to an
external power source (such as a charger), even
if all sounds have been silenced.
Volume
From Volume, you can modify the following
settings.
Set Ringer Volume
1. From Ringer Volume, scroll right or left to
set the ringer volume.
2. Press the OK key to save.
Set Speakerphone Volume
1. From Spkrphone Volume, scroll right or
left to set the speakerphone volume.
2. Press the OK key to save.
Set Earpiece Volume
1. From Earpiece Volume, scroll right or left
to set the earpiece volume.
2. Press the OK key to save.
Set Keypad Volume
1. From Key Volume, scroll right or left to set
the keypad volume.
2. Press the OK key to save.
Set Slide Sounds
1. From Slide Sounds, select Slide Open or
Slide Close.
2. Select a sound. (Scroll down the list to play
the sounds.)