Kyocera G2GO - Manual (Page 80)

80 Camera Setting Options
Enable Date/Time Stamp
From camera mode, select Options > Settings
> Date/Time > On to place a date/time stamp
each picture taken.
The
icon indicates when the date/time stamp
is on.
Enable Multishot Mode
From camera mode, select Options > Settings
> Multishot > On to take multiple pictures.
The
icon indicates multishot mode is
enabled. When you take a picture, press and
hold the OK key to take multiple pictures. A
single tone plays for each picture taken.
Your camera is set to a lower resolution during
multishot mode. The resolution setting returns
to the previous setting when you are done.
Set Shutter Sound
1. From camera mode, select Options >
Settings > Shutter Sound.
2. Select a sound to play when the shutter takes
a picture.
Set White Balance
1. From camera mode, select Options >
Settings > White Balance.
2. Scroll left or right to select the white balance
setting. Look at the viewfinder to see how
each setting looks.
Set Color Tone
1. From camera mode, select Options >
Settings > Color Tone.
2. Scroll left or right to select a color tone.
Look at the viewfinder to see how each
setting looks.
Set Picture Quality
From camera mode, select Options > Settings
> Picture Quality and a quality level for your
picture.
When you select a higher quality level, the size
of the file is bigger.
Set Save Location
If you have a memory card, you can save
pictures taken to it. From camera mode, select
Options > Settings > Save Location > Save To
Card.
If you remove your memory card, pictures will
be saved to your phone.