Kyocera G2GO - Manual (Page 75)

User Guide 75
Memory Card
Choose Files to Save
1. From Memory Card, select Items to Save
to choose what files you save to your
memory.
2. Select file types from the list provided. A
checkmark appears next to each file type
that is saved to the memory card. Press the
OK key to add or remove checkmarks.
3. When finished, select Done.
Format Memory Card
From Memory Card, select Format Card >
Yes to format your memory card.
Note: Formatting will erase all current
information on the memory card.
Set Com Port Speed
From Com Port Speed, select a data rate at
which your phone connects to a laptop or PC.
Check with your service provider for details.
Connect to TTY Device
You can connect the phone to a teletype (TTY)
device for the hearing impaired. (TTY device
sold separately.)
Note: Enable TTY only when using the phone
with a TTY device.
1. Connect the TTY device to your phone.
2. From TTY Device, select OK to clear the
notification.
3. Select one of the following:.
– TTY Off disables TTY.
– TTY On enables TTY devices.
– TTY On + Talk enables TTY devices
and voice carry over.
– TTY On + Hear enables TTY devices
and hearing carry over.
Note: You can also enter ##889 with your
keypad and select TTY to enable TTY.
Connect to Hearing Aid Device
With a T-coil hearing aid device (sold
separately) connected, you can enable the
hearing aid feature.
1. Connect the T-coil hearing aid device to
your phone.
2. From T-coil Hearing Aid, select OK >
Enabled.
Set USB Mode
You can set your phone to transfer files to and
from a computer.
From USB Mode, select one of the following:
•
Mass Storage to use the microUSB jack
with a USB cable to transfer files.
• Modem/COM to use the microUSB jack for
charging only.
Network
Enable Privacy Alert
From Privacy Alert, select Enabled to set your
phone to alert you when enhanced digital
CDMA privacy is lost or regained.
Enable Voice Privacy
From Voice Privacy, select Enhanced to use
enhanced digital CDMA privacy.