Imaging at work, Kyocera fs-9520dn, Print – Kyocera FS-9520DN User Manual
Page 12
Kyocera FS-9520DN
www.BERTL.com
tel. 732-761-2311
fax. 732-761-2312
Copyright © 2004 BERTL, Inc. 23-Jul-04
All Rights Reserved. The license under which this document is made available and applicable law prohibit any
reproduction or further transmission of any portion of this document. This document may only be viewed elec-
tronically through the BERTL.com website and may not be stored in electronic or hard copy format. Any repro-
duction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or omissions
contained in this document.
Page Number 11
Imaging at Work
tm
Finishing Options
In The Printer
Drivers:
The finishing options
users can select
under the Output tab
are dynamically
linked and related to
the type of finisher
that is installed.
For example, in the
illustrations on this
page, when the
printer default is
chosen as the output
area, the driver
autosenses that the
only finishing options
given are to collate
or rotate collate and
shows these options
(see area marked
with red).
However, when the
finisher is selected,
the driver lets the
finishing options
extend to include
staple, offset and
punch.