Imaging at work, Kyocera fs-9520dn, Product dynamics – Kyocera FS-9520DN User Manual
Page 4
Kyocera FS-9520DN
www.BERTL.com
tel. 732-761-2311
fax. 732-761-2312
Copyright © 2004 BERTL, Inc. 23-Jul-04
All Rights Reserved. The license under which this document is made available and applicable law prohibit any
reproduction or further transmission of any portion of this document. This document may only be viewed elec-
tronically through the BERTL.com website and may not be stored in electronic or hard copy format. Any repro-
duction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or omissions
contained in this document.
Page Number 3
Imaging at Work
tm
Design Features:
The Kyocera FS-9520DN offers
monochrome printing at advertised speeds
of up to 51ppm, with resolution up to 2,400
x 600dpi. Ethernet connectivity and duplex
are included standard, as are three printer
drivers (PCL and PostScript emulations,
plus the manufacturer’s proprietary driver).
Finishing options are a strong point on the
Kyocera FS-9250DN. Users can choose
from a wealth of options including saddle-
stitch finishing, hole punching, folding and
offset stacking — a sharp contrast to most
competing devices, which offer limited
finishing capabilities if they offer any at all.
This gives the Kyocera FS-9520DN a
distinct advantage in any environment
where finishing is needed.
Paper capacity starts at 1,200 sheets and
goes to a maximum of 4,200 sheets —
among the highest in this market sector.
Warmup time is quoted as 25 seconds from
cold start, with first page out time advertised
at 5 seconds.
Product Dynamics