Kyocera FS-9520DN - Manual (Page 5)

Kyocera FS-9520DN
www.BERTL.com
tel. 732-761-2311
fax. 732-761-2312
[email protected]
Copyright © 2004 BERTL, Inc. 23-Jul-04
All Rights Reserved. The license under which this document is made available and applicable law prohibit any
reproduction or further transmission of any portion of this document. This document may only be viewed elec-
tronically through the BERTL.com website and may not be stored in electronic or hard copy format. Any repro-
duction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or omissions
contained in this document.
Page Number 4
Imaging at Work
tm
The Control Panel:
The control panel is straightforward and
easy to use, consisting of a Menu button,
an Enter button and four directional arrow
keys intended to help users navigate the
menus. A large green Go button and
smaller red Cancel button are also present
and clearly marked.
Indicator lights flash for Ready, Data and
Attention. In addition, a paper indicator light
shows which paper cassette is being used
to feed paper.
Connectivity:
Standard connections include 10/100
BaseTX Ethernet, a parallel port and a USB
2.0 connection.
The inclusion of USB 2.0 is a plus for a
single user, because it transfers data at a
significantly faster rate than USB 1.1, which
is still offered on many devices currently on
the market.
An optional Multiple Interface Connection
(MIC) allows for simultaneous data transfer
via up to four interfaces, with each interface
having its own virtual printer.
Maintenance:
The Kyocera FS-9520DN has a 500,000-
page life developer and drum and a
maximum monthly duty cycle advertised at
up to 300,000 pages. The manufacturer
rates the average monthly duty cycle at up
to 55,000 pages.
The device comes with a starter toner
cartridge which yields an advertised 20,000
pages @5% coverage.
Replacement toner cartridges are rated by
the manufacturer at 40,000 pages @5%
coverage.
Like other printers from this manufacturer,
the Kyocera FS-9520DN features an ultra
long life imaging system based on an
amorphous silicon print drum. It is
continually polished and reconditioned by
tiny ceramic particles mixed into the
“Ecotone” toner. This results in a drum that
lasts much longer than most competing
devices offer.
Warranty:
A one-year warranty is Included with
purchase. Kyocera guarantees the drum
and developer for a total of 3 years or
500,000 pages (whichever comes first),
provided that the printer is used and
cleaned according to the service
instructions. An extended warranty (up to 5
years) is available at low cost.
Product Dynamics