Kyocera VMKX5C - Manual (Page 23)

User Guide for the Slider Sonic Phone 15
Answering calls using the slide
You can set the phone to answer immediately
when you open the slide.
• Select
Menu
→
Settings
→
Convenience
→
Open to answer
→
Enabled .
– Select Disabled to have the phone
continue ringing when you open the slide.
Adjusting the volume during a call
• To adjust the earpiece volume during a call,
press up or down.
Silencing an incoming call
• Press or .
Note: In the absence of voicemail, this feature
drops the call.
- or -
• Press then press to answer the call.
This action silences the current call only. The next
call will ring as normal.
Redialing a number
• To redial a recent call, press twice to
open your Recent calls list. Highlight a phone
number or name and press
.
Tip: To redial the last number called,
received, or missed, press three times.
Calling a saved number
If you have already saved a phone number, you
can use the Contacts list to find it quickly.
1. From the home screen, press the right softkey
to select Contacts .
2. Scroll down the list to find the contact you
want to call.
3. Highlight the name and press to dial
the number.
Using the speakerphone
Your Slider Sonic phone has a built-in
speakerphone.
• To turn on the speaker, open the slide and
press . If you press during an
incoming call alert, you answer the call.
The
icon at the top of the phone screen
indicates that the speakerphone is on.
• To turn off the speakerphone, open the slide
and press .
Setting the phone to hold calls
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
Note: This feature will not work if “Open to
Answer” is enabled. See “Answering calls using
the slide” on page 15.
1. Select Menu
→
Settings
→
Convenience
→
Hold call
→
Enabled.