Saving files on the card, Manual – Kyocera VMKX5C User Manual
Page 41
User Guide for the Slider Sonic Phone
33
Manual
Note:
Formatting or reformatting a card erases all
data and music files that were previously saved on
the TransFlash card.
1.
Lift the TransFlash cover up. (See item 18 in
the picture on page 4).
2.
Hold the card with the metal contacts facing
up and push the card in the slot until it clicks
into place.
3.
Close the cover.
4.
Select
Menu
→
Settings
→
Memory card
→
Format card
.
5.
Press the left softkey
to select
Yes
and
format the card.
6.
The message “Card now ready for use.”
appears after completion.
Saving files on the card
You can manage music and video files on the
memory card by using either the provided USB
cable (Windows 2000 and XP users) or an
optional memory card reader (Windows 2000, XP
and Mac users).
Note:
• To purchase a memory card reader, visit
www.kyocera-wireless.com/store
.
• Use only a previously formatted memory card
when loading music files.
• If you receive an out of memory message, you
will need to delete files from either My music
or My videos before you can continue to save
new files.
Using the USB cable (Windows 2000
and XP users only)
1.
Make sure the TransFlash card is inserted into
the slot on the side of the phone.
2.
Turn on your phone and connect it to your
computer using the provided USB cable. The
phone will now be recognized as a removable
disk and will show up as a new available drive
under “My Computer.”
3.
Manage your music files by dragging and
dropping MP3 and WMA files between the “My
music” folder and your computer.
4.
Manage your video files by dragging and
dropping 3GP files between the “My videos”
folder and your computer.
5.
To properly disconnect your phone from your
computer, double click on the
Safely Remove
Hardware
icon in the System Tray on your
computer. Follow the prompts to
Stop or
remove a Mass Storage Device
When you are done managing music and video
files, unplug the USB cable and press
.