Kyocera VMKX5C - Manual (Page 68)

60 Using Voice Recognition
2. Select Menu
→
Settings
→
Keyguard
→
Disabled , then press .
To wake up the phone:
1. Say “ Wake Up ” and listen for a tone.
2. Say “ Wake Up ” again until you hear two tones.
If the phone does not recognize your
“Wake up” command, see “Training voice
recognition” on page 60.
Answering the phone
You can set your hands-free car kit to (1) answer
automatically or (2) answer using a
voice command.
Answering automatically
You can set your phone to answer automatically.
Note: This setting also works with the portable
hands-free car kit.
• Select Menu
→
Settings
→
Accessories
→
Call answer
→
After 5 seconds .
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free car kit.
• Select
Menu
→
Settings
→
Accessories
→
Call answer
→
Disabled .
To activate the Voice Answer setting:
1. Select Menu
→
Settings
→
Call options
→
Voice answer .
2. Highlight Enabled and press .
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” If the caller is
recognized as a contact entry in your phone, then
the phone will say “Incoming call from (Name),
answer?”
• Say “
Yes ” or press any key except .
Ignoring an incoming call
To ignore an incoming call, do one of the
following:
• Say “
No ” and press to silence the alert.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
Training voice recognition
If your phone is having trouble recognizing your
voice, you can train it with the commands
Yes ,
No , and Wake up .
1. Select Menu
→
Settings
→
Call options .
2. Select Voice training .
3. Read the message and press the left softkey
to select OK and continue. Cancel returns
you to the previous screen.
4. Select Train All or the item you want to train.
5. Follow the prompts for each word until
training is complete.